Is there a WiFi camera with an app for viewing when away from home, that has decent privacy? Plug and play would be nice. Limited time to do major setup as in 2 hours tops. Cost is fine nothing into 4 digits. Recording not neccesary. No storage is needed. Simple live viewing is all.

  • solrize@lemmy.world
    link
    fedilink
    arrow-up
    30
    ·
    5 months ago

    It always seems simplest to do this stuff with raspberry pi cameras or cheap webcams, and wired networks if feasible. Then use ffmpeg and icecast to stream through a VPS. Anything made as a consumer product is likely a shambles of crap software and security holes.

    • OhVenus_Baby@lemmy.ml
      cake
      OP
      link
      fedilink
      arrow-up
      4
      ·
      5 months ago

      I dont have a vps though currently. I do have a webcam. No idea how to set it up to or viewing and to run 24/7. I can port forward though and am pretty network/software literate.

          • solrize@lemmy.world
            link
            fedilink
            arrow-up
            3
            ·
            5 months ago

            It’s a trade off between video quality and bandwidth but you can set the ffmpeg parameters to the bandwidth you want, more or less. If you have 2mbits up you can do ok. Motion detection can help if it’s for security and not much is happening most of the time.

            • OhVenus_Baby@lemmy.ml
              cake
              OP
              link
              fedilink
              arrow-up
              1
              ·
              5 months ago

              10 is the low upload for me. So this might work just fine. Not sure on setup but I definitely want to get it done soon as possible. I just don’t have much time between work trips. So I need a rapid solution.

      • BearOfaTime@lemm.ee
        link
        fedilink
        arrow-up
        1
        ·
        5 months ago

        If you currently have an IP camera setup, add Tailscale to your network with the Subnet Routing feature enabled.

        You can then access that camera from anywhere.

        Optionally also enable the Funnel feature, and you won’t even need the Tailscale client.