I got a Turris Omnia Router, which I want to use as a NAS.

I also really like SATA SSDs, they are abundant (I have too many), never overheat (take that, NVME crap) etc.

The router is pretty tight, a SATA SSD fits in, but I need a cable to have the adapter 90° and a bit upwards.

Now I wonder, what adapter do I need? On AliExpress I find one with 1 or 2 SATA connections, 1 is probably best for sanity and reliability.

This one looks more sketchy, as it has 2 SATA sockets.

  • empireOfLove2@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    4
    ·
    edit-2
    3 months ago

    So it looks like the omnia supporta msata (mini sata) on one of the B-key M.2 slots. Just get an msata to sata adapter (which is an electrical adapter) and not an epcie to sata adapter (which requires an adapting IC/controller). It will be cheaper and more reliable. Both will require some power supply though.

    • boredsquirrel@slrpnk.netOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      edit-2
      3 months ago

      Interesting, thanks!

      Could you elaborate on the power supply? I found such an adapter:

      With a small 7-pin SATA cable, do SSDs need additional power?

      The power supply is a typical laptop barrel jack with converter, so powering the SSD wouldnt be a good option

      • empireOfLove2@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        5
        ·
        edit-2
        3 months ago

        Well, m.2 slots (both sata and epcie) typically only provide 3.3 volt power. Standalone 2.5" sata SSD’s require a 5 volt supply. Obviously there’s a bit of a mismatch there. So you’ll likely need to find your power from a difference source like a USB port or the internal power supply.

        That adapter image is a data adapter, most likely for straight-thru msata connections, and is probably what you need. but 2.5" SSD’s also require the wide 15 pin power connector in addition to the small data connector and that power has to come from something that is not the m.2 slot.

        • boredsquirrel@slrpnk.netOP
          link
          fedilink
          English
          arrow-up
          2
          ·
          3 months ago

          Thanks a lot! The Omnia has a ton of pins inside, I will check if some can provide power.

          It has a small amount of RAM, so running a web server, NAS or torrent server would be possible. That would be great with like a 4TB SATA SSD.

          • empireOfLove2@lemmy.dbzer0.com
            link
            fedilink
            English
            arrow-up
            1
            ·
            3 months ago

            Oh yeah, that’d be a great file server. Even low power CPU’s can typically serve data about as fast as a SATA-III drive can provide it.

            • boredsquirrel@slrpnk.netOP
              link
              fedilink
              English
              arrow-up
              1
              ·
              2 months ago

              And tbh, the CPU is 32bit which sucks I guess, I am also not sure about security disadvantages. The GrapheneOS people know way more here. Also nothing about how well Marvell really patches these old CPUs.

              But SATA SSDs just beat NVMEs. I hate NVMEs. Never needed that speed, they just overheat all the time and require too much passive cooling, I destroyed an NVME because the cooling pad and the laptop bottom bent it.

              I was able to cancel a miniPCIe-SATA adapter buy on Aliexpress and got an electrical mSATA-SATA adapter instead, way simpler and probably faster.

              Just need to find out if power is needed and from where to get it.

              https://www.turris.com/en/products/omnia/specification/