cross-posted from: https://discuss.tchncs.de/post/26741305
DeltaLima has developed a Grow Controller and firmware with WebUI and published it under the MIT license.
Features
- Gather Values from sensors
- Temperature
- Humidity
- Soilmoisture
- Time based (ntp) Light control
- Smooth Fade in and fade out configurable
- Control of two Fans
- FAN1 is controlled by PWM supply Voltage
- FAN2 is controlled by PWM 4 Pin Fan header
- Simple watering control
- 3 modes for water plan
- By soilmoisture value
- by time (every n days, different interval for vegetation and bloom phase)
- both combined
- Define the different phases of your grow
- Set amount of days for vegetation and bloom phase.
- After bloom phase CanGrow enters harvest mode by its own, which means the light and watering system gets disabled
- Maintenance Mode
- When using LED PWM, you can activate Maintenance Mode, which dimms the light. (at night it will turn on when enabling maintenance mode)
- ESP32Cam integration on the Dashboard
- Support for SSD1306 128x64 I2C OLED display
- rotates through three different screens
- Get measured values as json
GET /api/sensors
Supported Sensors
- Analog capacitive soilmoisture
- I2C Chirp (https://wemakethings.net/chirp/)
- Soilmoisture
- Temperature
- I2C BME280
- Temperature
- Humidity
- I2C SHT31
- Temperature
- Humidity
- Analog water level indicator
- Builtin on CanGrow PCB
- simple voltage divider, check out https://deltalima.org/blog/index.ph...e-step-water-level-indicator-for-arduino-esp/
@UxyIVrljPeRl
@Churbleyimyam
Growing things is so dependent on cloud providers. /s
@abeorch@friendica.ginestes.es
It was a joke about cloud-based growrooms: https://www.fridgegrow.com/
If your router decides to give up, your cannabis will be dead. At least your indoor grow…
@frisbeedude
Yeah.