• phillaholic@lemm.ee
    link
    fedilink
    English
    arrow-up
    7
    ·
    1 year ago

    You can buy beelink small form factor pcs from Amazon for around $150 with cases and power supplies included.

    • peregus@lemmy.world
      link
      fedilink
      English
      arrow-up
      8
      arrow-down
      1
      ·
      1 year ago

      But…he said that it’s not as cheap as it used to be and too power hungry and you propose an 150$ PC?

      • phillaholic@lemm.ee
        link
        fedilink
        English
        arrow-up
        7
        arrow-down
        2
        ·
        1 year ago

        I’m agreeing with them. By the time you buy the Pi 5, and all the add-ons you need, it’s going to rival these SFF systems with full x86 Intel chips with efficiency cores.

          • phillaholic@lemm.ee
            link
            fedilink
            English
            arrow-up
            2
            arrow-down
            2
            ·
            1 year ago

            Case, cooler, power supply, storage at minimum, dongle/adapters probably too.

              • somedaysoon@lemmy.world
                link
                fedilink
                English
                arrow-up
                5
                ·
                edit-2
                1 year ago

                It isn’t, you can get SFF PCs for as little as $75 on eBay that have Quicksync CPUs and will run circles around a RPi, especially if you have to do any transcoding. They are also really power efficient… 7-20W idles.

                https://www.ebay.com/itm/195163970881

                SBCs really should no longer be considered for selfhosting unless you are A) in an extremely power constrained environment like an off-grid RV or vanlife situation or B) clustering

                • peregus@lemmy.world
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  ·
                  1 year ago

                  You’re right, if there’s no need of GPIO. For example I’m using a Fujitsu Futro S720 that I’ve bought for about 30/40€ and it consumes about 4W idle and 10/15W maximum (I don’t really remember). My point of view is like yours: those boards are not good for self hosting, are good for IoT, digital signage and…mmm…I don’t know what else.