It looks like they are working on fixing that with this pull request.

I just checked myself and it’s card1 too, now I am curious why it’s not card0. 🤷

I believe it’s cat /sys/class/drm/card0/device/pp_power_profile_mode.

There’s also the power_dpm_force_performance_level.

I agree with this. I understand that the majority of users also don’t read release notes and some don’t even install add-ons, with this being enabled by default this would provide them with a more anonymous ad experience.

As a small homelabber I agree with this. I started with a baremetal and using Docker, and switched to Proxmox, and now over to Incus, actually currently I am using Debian with cockpit + cockpit-machines. I do like Incus, I keep hopping back and forth between cockpit, I need to settle on one.

That’s interesting! I wonder if they are locking down factory installations.

About a month ago I was able to do it with a fresh install of Pro in a VM, I’ll do a quick test and see if it works on Home…and it works too. I had to disconnect the network and then run the OOBE\BYPASSNRO command, it rebooted and gave me the continue without network and limited setup options.

Unless I missed something, the article states as follows

Another method of bypassing the account lockdown still exists. You simply have to enter OOBE\BYPASSNRO in the command prompt during the Windows 11 setup process, which allows you to skip the connection to the Internet and thus also the link to a Microsoft account.

I agree. I am someone who values their privacy and often does not like opt-out style analytics however I also know opt-in skews analytics. The way the searches are only categorized, and they are using Oblivious HTTP keeping IP addresses private makes me A-OK with this.

Yeah, Debian has older firmware found in the firmware-amd-graphics package which doesn’t include the firmware. You’ll need to download it from https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/ I believe anything from linux-firmware-20231030 and newer should work.

20231030 tag: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/amdgpu?h=20231030 or newest(20240410) tag: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/amdgpu?h=20240410

These files need to be placed in /lib/firmware/amdgpu/

It’s a relatively low performance hit and it benefits me when having to replace a failing/old disk. I can just toss the drive without having to erase the data first, that is as long as the key is a secure length.

It is very useful! It’s also slightly customizable in that you can have it not save duplicate commands.

More information can be found on the Arch Wiki or the man page

~53 W

• Server:

  • AMD Ryzen 5 5600G
  • 4x16 GB DDR4 3200 Mhz
  • 256 GB NVMe as boot-disk
  • 2x256 GB Samsung SSDs for VMs
  • 2x2 TB WD Red Plus HDDs

• Mini PC: Beelink S12 N95

  • 16 GB DDR4
  • 256 GB NVMe

• 8 port unmanaged TP Link switch

I would like to expand my storage, however I don’t have any available SATA ports and I believe adding an HBA would increase the idle draw about 8 W. I might just upgrade the SSDs and split the storage between the HDDs and SSDs.

I recently switched from Proxmox to Debian Bookworm with Incus(LXD fork) as my primary setup, it’s been a pleasant experience. I also like the idea of using something like Cockpit to manage VMs though haven’t come to a need yet for a VM over a container. I’ll also point out that Incus can handle VMs as well.

Stéphane Graber, Project leader of Linux Containers is also on the fediverse and responds to questions often.

That’s a good recommendation, thanks!

There’s even an RSS feed for that page: https://openwrt.org/feed.php?mode=list&ns=advisory

You’re welcome! Also thanks for asking this question, I hadn’t seen ShotShare before, it looks useful.

No, since you are using the bind mount, you do not need to use the volume.

I just did another test.

You should be able to create the directories manually. I cheated by simply cloning the repo and copying them to the bind mount location like so. You can use the bind mount method like you wanted.

git clone https://github.com/mdshack/shotshare
cp -r shotshare/storage/* /srv/dev-disk-by-uuid-7fe66601-5ca0-4c09-bc13-a015025fe53a/Files/Shotshare/shotshare_data/
chown 82:82 -R /srv/dev-disk-by-uuid-7fe66601-5ca0-4c09-bc13-a015025fe53a/Files/Shotshare/shotshare_data

It will be stored in /var/lib/docker/volumes, you can find the exact location by inspecting the volume. Use docker volume ls to list the volumes, and do docker volume inspect <volume_name> replacing <volume_name> with the one from the list. Look for “Mountpoint”, that is the exact location. You could try copying that to bind mount location, though I can’t be sure if it will continue to work.

This appears to be the exact same problem as https://github.com/mdshack/shotshare/issues/31

For testing I just spun up a VM with Docker, I tried the same compose file as you. I found I had to use the volume instead of a bind mount for /app/storage.

This compose file should work.

version: "3.3"
services:
  shotshare:
    ports:
      - 2000:80
    environment:
      - HOST=:80
      - ALLOW_REGISTRATION=false
    volumes:
      - shotshare_data:/app/storage
      - /srv/dev-disk-by-uuid-7fe66601-5ca0-4c09-bc13-a015025fe53a/Files/Shotshare/database.sqlite:/app/database/database.sqlite
      - /srv/dev-disk-by-uuid-7fe66601-5ca0-4c09-bc13-a015025fe53a/Files/Shotshare/.env:/app/.env
    restart: unless-stopped
    container_name: shotshare
    image: mdshack/shotshare:latest
volumes:
    shotshare_data:
networks: {}

That error message says it the permissions of the /home/user/Documents/Docker/LinguaCafe/logs directory. You can try changing it full r/w temporarily to test.