I only see length on that box???
Also the image shows th plug sticking out, and as (2)40 mm, with something else that is unclear to me as (2)35mm.
Personally by the quality shown, the illustrations are useless to me.
The plug is 6mm meant for 4-5 mm screws, there is no indication of drill sizes that I can se.
There is also a measure on the right of (2) 12.5 mm which is completely unclear what is for?
Pretty cleary states the drill dimension right here
There is also a measure on the right of (2) 12.5 mm which is completely unclear what is for?
It means that the board you’re attaching to needs to be atleast 12.5mm thick for the plug to work properly.
and as (2)40 mm, with something else that is unclear to me as (2)35mm.
The hole needs to be atleast 40mm deep and the screw must be long enough that when accounted for the thickness of the material you’re attaching it needs to be atleast 35mm into the plug.
I only see length on that box???
Also the image shows th plug sticking out, and as (2)40 mm, with something else that is unclear to me as (2)35mm.
Personally by the quality shown, the illustrations are useless to me.
The plug is 6mm meant for 4-5 mm screws, there is no indication of drill sizes that I can se.
There is also a measure on the right of (2) 12.5 mm which is completely unclear what is for?
I don’t see how the image supports your point?
Rawl brand have these notes on the plastic, which I think is neat.
Brown plug, 7mm hole, 5-6mm screw.
Even a little gauge to go with it.
Pretty cleary states the drill dimension right here
It means that the board you’re attaching to needs to be atleast 12.5mm thick for the plug to work properly.
The hole needs to be atleast 40mm deep and the screw must be long enough that when accounted for the thickness of the material you’re attaching it needs to be atleast 35mm into the plug.